Quick Gate Customized Storage Doors in Factory Buildings are more convenient to open in that way
Nowadays, express doors are widely used in most industrial factories, and there are many ways to open industrial doors, which can be selected according to user theory.
1。 Photoelectric Induction Control
Photoelectric induction opening is suitable for access doors of most vehicles and people. When people and vehicles pass through the photoelectric induction area, the control induction circuit receives the photoelectric induction signal and instructs the fast door to open.
Advantages: When the control handle is in the active gear position, it does not need personnel to operate, and the industrial door will be open and blocked actively.
Defect: It will pass by the producer, but the industrial sliding door is misjudged and opened.
2. Geomagnetic induction control
The geomagnetic ring opens the passageway door which is suitable for vehicle or other equipment, personnel to push and pull metal car in and out of frequency.
Advantages: When the control handle of the control box hits the active gear position, only metal objects pass through the induction area of the magnetic induction coil, the industrial progress door can be opened on its own initiative. Note that the flexible strength of the geomagnetic ring inductor can be adjusted by itself.
Defect: The door will not open when a person passes through the geomagnetic induction area without carrying a metal object. When the control handle is in the position of the manual gear, the geomagnetic induction does not work. At this moment, only the operation button, pull rope switch and other operation doors open and close.
3. Radar Manipulation
Radar openings are suitable for access doors for other vehicles, such as forklift trucks, and people.
Advantages: fully active opening and blockade, no need for personnel operation, just enter the radar induction area, the industrial door will open actively.
Defect: The industrial sliding door will open if only a moving animal passes through the radar sensing area (when the control handle is in the active gear). When the control handle is in the position of the manual gear, the radar induction does not work. At the moment, it only needs to operate buttons, pull rope switches and so on to operate the opening and closing of the industrial door.
"Customized Fast Door" stacking doors in factory buildings are more convenient to open. The opening mode is chosen according to the user's application needs. Different opening modes have their own advantages and disadvantages.